Electronics
- No categories
MPU-6050 3 Axis Gyroscope + Accelerometer Module
රු650.00- Model: GY-521
- Chip: MPU-6050
- Power supply: 3.3V
- Communication mode: standard IIC communication protocol
Heart Beat Pulse Sensor
රු590.00- Biometric Pulse Rate or Heart Rate detecting sensor
- Plug and Play type sensor
- Operating Voltage: +5V or +3.3V
- Current Consumption: 4mA
- Inbuilt Amplification and Noise cancellation circuit.
- Diameter: 0.625”
- Thickness: 0.125” Thick
NodeMCU ESP8266 WiFi ESP-12E CH340 IoT Dev Board
රු800.00- 32 KB instruction RAM
- 80 KB user data RAM
- 16 KB ETS system data RAM
- External QSPI flash: up to 16 MB is supported (512 KB to 4 MB typically included)
- IEEE 802.11 b/g/n Wi-Fi
- Integrated TR switch, balun, LNA, power amplifier and matching network
- WEP or WPA/WPA2 authentication, or open networks
- 16 GPIO pins
L293D Motor Driver Module
රු590.00- EXCELLENT CHIP: Common DC motor drive module, using low current L293D chip DC motor drive chip, with excellent performance.
- VOLTAGE AND CURRENT: Uses DC motor and power supply up to 10V, which can provide a maximum current of 600mA per channel, is practical.
- COMPACT SIZE: With 4 bidirectional DC motors and 4 way PWM speed regulation, compact in structure, easy to install and use.
- EASY OPERATION: Multifunctional motor driver board with easy operation, powerful driver library support and feature updates.
- WIDE APPLICATION: Can be used with motors and servos, for experimental equipment platforms, interactive electronics, robots, etc.
L298N Mini Dual H-Bridge Motor Driver Board
රු360.00- Mini L298N 2 Channel H Bridge DC Motor Driver Board: Can drive two DC motors or a 4-wire 2-phase stepper motors ,can achieve forward rotation or reverse rotation, it is possible to adjust the rotation speed.for Electric Projects, Smart Car Robot
- Supply voltage: 2~10V
- Input Voltage: 1.8~7V
- Output Current: Single Operating current 1.5A, peak current up to 2.5A, low standby current (less than 10uA)
- Use of imported original chip, built-in low on-resistance MOS switch, minimal heat, no heat sink, small size, low power consumption, is ideal for battery powered
Female to Female Jumper Cable x 40 (20cm)
රු160.00- Specially developed composition of copper and aluminum
- 40 connecting cable F2F
- Length: 20 cm
- 2.54 mm sockets
- Easily separable
GY-BME280 barometric sensor for temperature, air humidity and air pressure
රු950.00- Energy-saving and high precision sensor for temperature, humidity and air pressure for your Smart Home or model building projects.
- Versatile: it is suitable for numerous applications including: humidity, temperature measurement of volume and air flow, home automation control (heating, ventilation, air conditioning (HVAC)), GPS enhancement (e.g. time-to-first-fix improvement, dead reckoning, slope detection), indoor navigation (change of floor detection, elevator detection), outdoor navigation, leisure and sports applications, weather forecast etc.
- Compatibility: I2C/IIC interface, compatible with Arudino, Raspberry Pi and perfectly suitable with 3.3V and 5V microcontrollers
- Factory calibrated: reliable, stable and durable to use for many of your microelectronic projects.
- This product includes an E-Book that provides useful information on how to begin your project, it helps with a quick setup and saves time on the configuration process. We provide an array of application examples, full installation guides and libraries.
IR Infrared Speed Sensor 4 PIN Module
රු0.00- Working voltage: 3.3V~5V
- The output form: Digital switching outputs. (0 and 1)
- Pin Configuration : VCC, GND, Dout and Aout
TP4056 5V 1A Micro USB 18650 Special Lithium Battery Charging Module (With Protection)
රු70.00- Input Voltage: 5V
- Maximum Charge Current: 1000mA.
- Board Size: 17.16 mm x 26.17 mm.
- Charging cut-off voltage: 4.2V ± 1%.
- Battery overcurrent protection current: 3A.
- Battery over-discharge protection voltage: 2.5V.
Micro:bit V1.5 BBC Offical Microbit Programmable Learning Development Board
රු5,950.00- Nordic nRF51822 Multi-protocol Bluetooth? 4.0 low energy/2.4GHz RF SoC
- 32-bit ARM Cortex M0 microprocessor (16MHz) 16kB RAM, 256kB Flash
- LED matrix ‘screen’ made up of 25 programmable LEDs Two programmable buttons
- USB Plug (Micro-USB plug) Reset button Status LED
