Electronics
- No categories
GY-91 MPU9250+BMP280 10-DOF 9-Axis Gyro Compass Accelerometer Module
රු2,550.00- MPU9250 + BMP280 module (Three-axis gyroscope + triaxial accelerometer + triaxial magnetic field + pressure)
- Module Model: GY-91
- Use chip: MPU-9250 + BMP280
- Power supply: 3-5v (internal low dropout regulator)
- Communication: standard IIC / SPI communications protocol -Chip 16bit AD converter, 16-bit data output
GY-273 HMC5883L Triple Axis Compass Magnetometer Sensor Module
රු590.00- HMC5883L module (three-axis magnetic field module)
- Model: GY-273
- IC: HMC5883L
- Module Power supply : 3-5v
- Communication: IIC communication protocol
- Measuring range: ± 1.3-8 gauss
- Size: 13.9 * 18.5
TCRT50003-pin Line Hunting Sensor Module
රු200.00- Supply Voltage: 3.3V~5V
- Detect distance: 1mm-8mm
- Digital Outputs LOW when objects detected
- On-board indicator LED to show the results
- On-board potentiometer to adjust the sensitivity
- On-board LM393 chip
GY-50 L3G4200D 3 Axis Digital Gyroscope Sensor Module
රු600.00- L3G4200D 3-Axes Gyroscope Angular Rate Sensor Module
- This is a breakout board for the L3G4200D low-power three-axis angular rate sensor.
- The L3G4200D has a full scale of ±250/±500/±2000 dps and is capable of measuring rates with a user-selectable bandwidth.
- These work great in gaming and Useful virtual reality input devices, GPS navigation systems and robotics
Arduino Pro Mini ATMega328 5V Board
රු800.00- Microcontroller: ATmega328
- Board Power Supply: 3.35 -12 V (3.3V model) or 5 – 12 V (5V model)
- Circuit Operating Voltage: 3.3V or 5V (depending on model)
- Digital I/O Pins: 14
- PWM Pins: 6
NE555 Oscillator Buzzer Electronic DIY Tone Generator
රු250.00- brand new and high quality
- Unsoldered
- This is Electronic DIY that uses the NE555, welding experience is required
- All necessary electronic parts are provided, please see the pictures for more
- The for image is for purposes only
2WD Robot Car Chassis Kit
රු1,150.00- This 2-Wheel Drive Robot Chassis Kit is perfect for Arduino-based robotics projects in Sri Lanka
- Mechanical structure is simple and easy to install.
- With a 4 AA battery box and power switch. (Batteries not included.)
- Can be used for distance measurement and velocity.
- Can use with other devices to realize function of tracing, obstacle avoidance, distance testing, speed testing and wireless remote control.
- Gear Motor Reduction Radio: 1:48.
A4988 Stepper Motor Driver for CNC 3D Printer
රු260.00- Supports Full, Half, 1/4, 1/8, and 1/16 step modes
- Operating voltage: 8V to 35V
- Output current up to 2A per phase (with heat sink)
- Fixed off-time current regulator for consistent performance
- Mixed decay and slow decay modes for smoother control
KY-037 Sound Detection Sensor Module
රු190.00- Sound Detection: Detects sound or noise in its environment.
- Adjustable Sensitivity: Includes a potentiometer for customizing sensitivity.
- Analog Output: Provides an analog voltage signal corresponding to detected sound levels.
- Usage Tip:
- Experiment with the sensitivity adjustment to optimize the sensor’s response to the desired sound intensity.
- Implement filtering or thresholding algorithms in your microcontroller code to process the analog signal effectively.
Vibration SW-18010P Sensor Module
රු215.00- Working voltage : 3.3V ~ 5V
- Output type: Digital switching output (0 and 1)
- Wide voltage : comparator LM393
TCRT5000 Infrared Line Tracking Sensor
රු175.00- Working voltage of 3.3V to 5V
- Output form: digital switch output (0 and 1)
- Using infrared reflection sensors TCRT5000
- Test reflection distance: 1mm to 25mm
IIC/I2C/TWI/SPI Serial Interface Board Module
රු150.00- I2C Address: 0X20 to 0X27 (the original address is 0X20; you can change it yourself.)
- Supply voltage: 5V
- the backlight and contrast are adjusted by potentiometer
- It comes with two IIC interface, which can
