Electronics
  • No categories

LIS3DSH 3-Axis Acceleration Sensor Module

රු725.00
  • Wide power supply voltage from 1.71 V to 3.6 V
  • Independent IO power supply (1.8 V) and compatible power supply voltage
  • Ultra-low energy consumption of about 2g/+ 6g/4g + 8g/+ 16 grams of dynamic optional full scale
  • IIC/SPI digital output interface
  • 16 little data output
  • A programmable integrated state machine

GY-BMI160 6DOF 6-axis Sensor Module Gravity Sensor

රු740.00
  • Module Model: GY-BMI160; Power Supply: 3-5V; Communication: standard IIC communication protocol; Chip: BMI160.
  • This sensor module is a small, 3 a-xis accelerometer and 3 ax-is gyroscope integrated in a single package.
  • The BMI160 is a small, low-power, low-noise 16-bit inertial measurement unit designed for use in mobile applications such as augmented reality or inland navigation, which require high-precision, real-time sensor data.
  • In full operation mode, with both the accelerometer and gyroscope enabled, allowing always-on applications in battery-powered devices.
  • 【Applications】: Augmented Reality, Indoor navigation, 3D scanning / indoor mapping, Advanced gesture recognition, Immersive gaming, 9-axis motion detection, Air mouse applications and pointers.

NodeMCU ESP8266 WiFi ESP-12E CH340 IoT Dev Board

රු800.00
  • 32 KB instruction RAM
  • 80 KB user data RAM
  • 16 KB ETS system data RAM
  • External QSPI flash: up to 16 MB is supported (512 KB to 4 MB typically included)
  • IEEE 802.11 b/g/n Wi-Fi
  • Integrated TR switch, balun, LNA, power amplifier and matching network
  • WEP or WPA/WPA2 authentication, or open networks
  • 16 GPIO pins

Arduino Pro Mini ATMega328 5V Board

රු800.00
  • Microcontroller: ATmega328
  • Board Power Supply: 3.35 -12 V (3.3V model) or 5 – 12 V (5V model)
  • Circuit Operating Voltage: 3.3V or 5V (depending on model)
  • Digital I/O Pins: 14
  • PWM Pins: 6

Atmel ATMEGA328P-PU Microcontroller

රු850.00
  • High Performance, Low Power Design
  • 8-Bit Microcontroller Atmel AVR advanced RISC architecture
  • Operating voltage:1.8 – 5.5V
  • Operating temperature range:40°C to 85°C

TCRT5000L Infrared 5 Channel Tracking Sensor

රු890.00
  • Applicable to a variety of platforms including for Arduino /AVR/ARM/PIC
  • High-Quality Tracker Sensor
  • The module is a convenient carrier for eight IR emitter and receiver pairs evenly paced.
  • Distance between each IR Sensor: 15mm
  • Uses 5 sensors for best resolution
  • Great useful in building fast line following and grid navigating robots

GY-MAX30102 Heart Rate Pulse Oxygen Concentration Sensor

රු895.00
  • Optical Heart-Rate Monitor and Pulse Oximetry Solution
  • Tiny 12.7mm x 12.7mm (0.5in x 0.5in) Board Size
  • Low Power
  • Device Drivers
  • Free Algorithm
  • Example C Source Code For Arduino And mbed Platforms
  • Test Data

Dual Joystick Stacking Shield for Arduino

රු950.00
  • Have fun controlling your own games, or mechanical devices with this Dual PS2-style Joystick Shield for Arduino from PMD Way with free delivery.
  • There are two thumb-joysticks which use two analogue inputs each, and also two digital inputs as they act as a button when pressed down.
  • The shield is fully-assembled and also includes useful breakouts for other Arduino connections. You can use this board with 3.3V and 5V Arduino and compatible boards.

D1 Mini NodeMcu 4M Bytes Lua WIFI Internet Of Things Development Board Based ESP8266

රු950.00
  • Use BRT (Bias Resistor Transistor)
  • Easier into flash mode.
  •  30% increase in radiating area
  • Good stability.

Arduino Pro Mini ATMega328 3.3V Board

රු950.00
  • Pro Mini Atmega328 3.3V 8Mhz
  • It has been programmed for its bootloader, without the user to buy ISP burner for programming, user-friendly.
  • This board connects directly to the FTDI Basic Breakout board and supports auto-reset.
  • Low-voltage board needs no interfacing circuitry to popular 3.3V devices and modules (GPS, accelerometers, sensors, etc)

GY-BME280 barometric sensor for temperature, air humidity and air pressure

රු950.00
  • Energy-saving and high precision sensor for temperature, humidity and air pressure for your Smart Home or model building projects.
  • Versatile: it is suitable for numerous applications including: humidity, temperature measurement of volume and air flow, home automation control (heating, ventilation, air conditioning (HVAC)), GPS enhancement (e.g. time-to-first-fix improvement, dead reckoning, slope detection), indoor navigation (change of floor detection, elevator detection), outdoor navigation, leisure and sports applications, weather forecast etc.
  • Compatibility: I2C/IIC interface, compatible with Arudino, Raspberry Pi and perfectly suitable with 3.3V and 5V microcontrollers
  • Factory calibrated: reliable, stable and durable to use for many of your microelectronic projects.
  • This product includes an E-Book that provides useful information on how to begin your project, it helps with a quick setup and saves time on the configuration process. We provide an array of application examples, full installation guides and libraries.

LCD2004 Parallel LCD Display with Blue Backlight

රු990.00
  • Model: LCD2004
  • Character Color: White
  • Backlight: Blue
  • Supply voltage: 5V
  • Dimensions(L x W x H) mm: 98 x 60 x 12