Electronics
  • No categories

DHT11 Temperature And Humidity Sensor Module with LED

රු380.00
  • Input Supply voltage (VDC): 3.3 ~ 5
  • Supply Current (mA): measurement 0.3mA standby 60μA.
  • Temperature measurement range: 0~50 degrees
  • Temperature measurement error: ±2 degrees
  • Humidity measurement range: 20%~95%RH
  • Humidity measurement error: ±5%RH

L293D Motor Driver Module

රු590.00
  • EXCELLENT CHIP: Common DC motor drive module, using low current L293D chip DC motor drive chip, with excellent performance.
  • VOLTAGE AND CURRENT: Uses DC motor and power supply up to 10V, which can provide a maximum current of 600mA per channel, is practical.
  • COMPACT SIZE: With 4 bidirectional DC motors and 4 way PWM speed regulation, compact in structure, easy to install and use.
  • EASY OPERATION: Multifunctional motor driver board with easy operation, powerful driver library support and feature updates.
  • WIDE APPLICATION: Can be used with motors and servos, for experimental equipment platforms, interactive electronics, robots, etc.

MQ-4 High Sensitivity Gas Methane (CNG) Detector Sensor Module

රු360.00
  • Detecting range: 300~10000ppm
  • Signal output indicator.
  • Dual Signal output (analog output and TTL output).
  • The TTL output signal is low level, allows us to connect with SCM directly.
  • Analog output 0~5V voltage.
  • Quick response and recovery.

MQ-6 Liquefied Petroleum Isobutane Propane Gas Sensor module

රු380.00
  • Model: MQ-6
  • Operating Voltage: 5V DC
  • Detecting Range:200-10000 ppm
  • Relative Humidity:<95% RH

MQ-2 Smoke LPG Butane Hydrogen Gas Sensor Detector Module

රු490.00
  • Operating Voltage:+5V
  • Preheat Duration:20 s
  • Analog Output Voltage:0 to 5 V
  • Dimension:36x20x21 mm

Female to Female Jumper Cable x 40 (20cm)

රු160.00
  • Specially developed composition of copper and aluminum
  • 40 connecting cable F2F
  • Length: 20 cm
  • 2.54 mm sockets
  • Easily separable

GY-BMI160 6DOF 6-axis Sensor Module Gravity Sensor

රු740.00
  • Module Model: GY-BMI160; Power Supply: 3-5V; Communication: standard IIC communication protocol; Chip: BMI160.
  • This sensor module is a small, 3 a-xis accelerometer and 3 ax-is gyroscope integrated in a single package.
  • The BMI160 is a small, low-power, low-noise 16-bit inertial measurement unit designed for use in mobile applications such as augmented reality or inland navigation, which require high-precision, real-time sensor data.
  • In full operation mode, with both the accelerometer and gyroscope enabled, allowing always-on applications in battery-powered devices.
  • 【Applications】: Augmented Reality, Indoor navigation, 3D scanning / indoor mapping, Advanced gesture recognition, Immersive gaming, 9-axis motion detection, Air mouse applications and pointers.

MPU9250 9-Axis Attitude Gyro Accelerator Magnetometer Sensor Module

රු1,465.00
  • Accelerometer, Gyroscope, and Magnetometer
  • Power Supply: DC3.3V-5V
  • Chip: MPU9250
  • Size: 22 mm x 17 mm.
  • Gyro range : ± 250 500 1000 2000 ° / s
  • Acceleration range: ± 2 ± 4 ± 8 ± 16g
  • Magnetic field range: ± 4800uT
  • 9 DOF modules

Arduino Uno R3 SMD CH340G Compatible

රු1,150.00
  • Microcontroller: ATmega328P
  • Serial IC : CH340G
  • Operating Voltage: 5V
  • Input Voltage: 7-12V (recommended 5V)
  • Digital I/O Pins: 14 (of which 6 provide PWM output)
  • PWM Digital I/O Pins: 6
  • Analog Input Pins: 6

Nema17 Stepper Motor 17HS4401 4-lead 42BYGH 1.5A 38mm

රු2,190.00
  • Model: 42HS40-1504 NEMA17 / 17HS4401
  • Stable structure, no jamming
  • Stable speed and low noise
  • Step Angle(degrees): 1.8°±0.09°
  • Phase Inductance: 3.7*(1±20%)mH/Phase
  • Positioning Torque: 15 mN.m REF.
  • Maximum starting rate:≥1500 PPS
  • Insulation resistance:≥100 MΩ (DC 500V)
  • Cable length: 1meter

JOHNSON 775 DC12V~24V high speed elctric drill motor

රු2,390.00
  • With low noise, high speed, high efficiency, low resistance fearures for this 6400PRM DC motor
  • Light and compact 12v to 24V DC motor, as good replacement for old or damaged gear motor
  • With metal material torque DC motor, lightweight, resistant abrasion and tough features, durable and reliable even you use it for long time
  • Used in numerous applications: this 12v to 24V torque gear motor perfectly fits for toys DIY, massage device, game device, game controller, cellphone etc

JGA25-370 12V 280RPM Encoder Electric Gear Motor

රු2,990.00
  • Integrated Encoder: Provides precise speed and position feedback
  • High Torque: Delivers significant torque for demanding tasks
  • Durable Build: Constructed for long-lasting reliability
  • Compact Size: Easy to integrate into various systems
  • Versatile Use: Ideal for robotics, automation, and custom projects