Sensors
- No categories
GY-BME280 barometric sensor for temperature, air humidity and air pressure
රු950.00- Energy-saving and high precision sensor for temperature, humidity and air pressure for your Smart Home or model building projects.
- Versatile: it is suitable for numerous applications including: humidity, temperature measurement of volume and air flow, home automation control (heating, ventilation, air conditioning (HVAC)), GPS enhancement (e.g. time-to-first-fix improvement, dead reckoning, slope detection), indoor navigation (change of floor detection, elevator detection), outdoor navigation, leisure and sports applications, weather forecast etc.
- Compatibility: I2C/IIC interface, compatible with Arudino, Raspberry Pi and perfectly suitable with 3.3V and 5V microcontrollers
- Factory calibrated: reliable, stable and durable to use for many of your microelectronic projects.
- This product includes an E-Book that provides useful information on how to begin your project, it helps with a quick setup and saves time on the configuration process. We provide an array of application examples, full installation guides and libraries.
KY-028 4 Pin Digital Temperature Thermistor Thermal Sensor
රු240.00- using the NTC thermistor sensor , good sensitivity
- the comparator output signal clean waveform is good , driving ability, than 15mA.
- adjust the temperature distribution bit detection threshold
- Working voltage 3.3V-5V
- he output format : Digital switching output (0 and 1)
- with bolt holes for easy installation
IR Infrared Speed Sensor 4 PIN Module
රු0.00- Working voltage: 3.3V~5V
- The output form: Digital switching outputs. (0 and 1)
- Pin Configuration : VCC, GND, Dout and Aout
MQ-7 CO Carbon Monoxide Coal Gas Sensor Module
රු430.00- Operating voltage: DC 5 V.
- The analog output voltage, the higher the concentration the higher the voltage.
- The carbon monoxide detection with better sensitivity.
- With a long service life and reliable stability.
- Rapid response and recovery characteristics.
- Range: 10 to 1000 ppm
LIS3DSH 3-Axis Acceleration Sensor Module
රු725.00- Wide power supply voltage from 1.71 V to 3.6 V
- Independent IO power supply (1.8 V) and compatible power supply voltage
- Ultra-low energy consumption of about 2g/+ 6g/4g + 8g/+ 16 grams of dynamic optional full scale
- IIC/SPI digital output interface
- 16 little data output
- A programmable integrated state machine
GY-MAX30102 Heart Rate Pulse Oxygen Concentration Sensor
රු895.00- Optical Heart-Rate Monitor and Pulse Oximetry Solution
- Tiny 12.7mm x 12.7mm (0.5in x 0.5in) Board Size
- Low Power
- Device Drivers
- Free Algorithm
- Example C Source Code For Arduino And mbed Platforms
- Test Data
MPU-6050 3 Axis Gyroscope + Accelerometer Module
රු650.00- Model: GY-521
- Chip: MPU-6050
- Power supply: 3.3V
- Communication mode: standard IIC communication protocol
GY-61 ADXL335 3-axis Accelerometer Tilt Angle Sensor Module
රු1,250.00- Operating Voltage: 3V to 6V DC
- Operating Current: 350μA
- Sensing Range: ±3g
- 3-axis sensing
- High Sensitivity for small movements
MPU9250 9-Axis Attitude +Gyro + Accelerator + Magnetometer Sensor Module
රු1,550.00- Acceleration, Gyroscope, and Magnetometer
- 9 DOF module
- Build-in ultra-low noise linear LDO voltage regulator.
- Built-in onboard filters, which reduce noise from the motor and other high current electronics.
Infrared Obstacle Avoidance Sensor Module
රු180.00- Working Voltage : 3.3v to 5v
- Detectable Distance : 2 ~ 30cm,
- Detection angle : 35 °
- Comparator chip: LM393
GY-91 MPU9250+BMP280 10-DOF 9-Axis Gyro Compass Accelerometer Module
රු2,550.00- MPU9250 + BMP280 module (Three-axis gyroscope + triaxial accelerometer + triaxial magnetic field + pressure)
- Module Model: GY-91
- Use chip: MPU-9250 + BMP280
- Power supply: 3-5v (internal low dropout regulator)
- Communication: standard IIC / SPI communications protocol -Chip 16bit AD converter, 16-bit data output
