Sensors
- No categories
GY-MAX30102 Heart Rate Pulse Oxygen Concentration Sensor
රු895.00- Optical Heart-Rate Monitor and Pulse Oximetry Solution
- Tiny 12.7mm x 12.7mm (0.5in x 0.5in) Board Size
- Low Power
- Device Drivers
- Free Algorithm
- Example C Source Code For Arduino And mbed Platforms
- Test Data
HC-SR505 Mini Infrared PIR Motion Sensor Infrared Detector Module
රු290.00- Automatic induction: to enter the sensing range
- Ultra-small size.
- Repeatable trigger
- Wide operating voltage range
- Micropower: quiescent current <50
- Output high signal: easy docking and all kinds of circuits.
Heart Beat Pulse Sensor
රු590.00- Biometric Pulse Rate or Heart Rate detecting sensor
- Plug and Play type sensor
- Operating Voltage: +5V or +3.3V
- Current Consumption: 4mA
- Inbuilt Amplification and Noise cancellation circuit.
- Diameter: 0.625”
- Thickness: 0.125” Thick
Hw-596 / Gy-68 Arduo Bmp180 Barometric Pressure Sensor Module
රු290.00- 1.8V to 3.6V Supply Voltage
- Low power consumption – 0.5uA at 1Hz
- I2C interface
- Max I2C Speed: 3.5Mhz
- Very low noise – up to 0.02hPa (17cm)
- Fully calibrated
Infrared Obstacle Avoidance Sensor Module
රු180.00- Working Voltage : 3.3v to 5v
- Detectable Distance : 2 ~ 30cm,
- Detection angle : 35 °
- Comparator chip: LM393
IR Infrared Speed Sensor 4 PIN Module
රු0.00- Working voltage: 3.3V~5V
- The output form: Digital switching outputs. (0 and 1)
- Pin Configuration : VCC, GND, Dout and Aout
KY-028 4 Pin Digital Temperature Thermistor Thermal Sensor
රු240.00- using the NTC thermistor sensor , good sensitivity
- the comparator output signal clean waveform is good , driving ability, than 15mA.
- adjust the temperature distribution bit detection threshold
- Working voltage 3.3V-5V
- he output format : Digital switching output (0 and 1)
- with bolt holes for easy installation
KY-037 Sound Detection Sensor Module
රු190.00- Sound Detection: Detects sound or noise in its environment.
- Adjustable Sensitivity: Includes a potentiometer for customizing sensitivity.
- Analog Output: Provides an analog voltage signal corresponding to detected sound levels.
- Usage Tip:
- Experiment with the sensitivity adjustment to optimize the sensor’s response to the desired sound intensity.
- Implement filtering or thresholding algorithms in your microcontroller code to process the analog signal effectively.
LIS3DSH 3-Axis Acceleration Sensor Module
රු725.00- Wide power supply voltage from 1.71 V to 3.6 V
- Independent IO power supply (1.8 V) and compatible power supply voltage
- Ultra-low energy consumption of about 2g/+ 6g/4g + 8g/+ 16 grams of dynamic optional full scale
- IIC/SPI digital output interface
- 16 little data output
- A programmable integrated state machine
MPU-6050 3 Axis Gyroscope + Accelerometer Module
රු650.00- Model: GY-521
- Chip: MPU-6050
- Power supply: 3.3V
- Communication mode: standard IIC communication protocol
MPU9250 9-Axis Attitude +Gyro + Accelerator + Magnetometer Sensor Module
රු1,550.00- Acceleration, Gyroscope, and Magnetometer
- 9 DOF module
- Build-in ultra-low noise linear LDO voltage regulator.
- Built-in onboard filters, which reduce noise from the motor and other high current electronics.
MPU9250 9-Axis Attitude Gyro Accelerator Magnetometer Sensor Module
රු1,465.00- Accelerometer, Gyroscope, and Magnetometer
- Power Supply: DC3.3V-5V
- Chip: MPU9250
- Size: 22 mm x 17 mm.
- Gyro range : ± 250 500 1000 2000 ° / s
- Acceleration range: ± 2 ± 4 ± 8 ± 16g
- Magnetic field range: ± 4800uT
- 9 DOF modules
