Shop
- No categories
L298N Based Motor Driver Module
රු410.00- gical voltage: 5V
- Drive voltage: 5V-35V
- Logical current: 0-36mA
- Drive current: 2A (max. single bridge)
- Max power: 25W
- Dimensions: 44 x 44 x 28 (LxWxH)mm
- Weight: 26 gm
8 channel 5V DC Relay Module
රු1,390.00- 5V 8-Channel Relay interface board, and each one needs 15-20mA Driver Current
- Equiped with high-current relay, AC250V 10A ; DC30V 10A
- Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)
- Indication LED’s for Relay output status
TCRT5000L Infrared 5 Channel Tracking Sensor
රු890.00- Applicable to a variety of platforms including for Arduino /AVR/ARM/PIC
- High-Quality Tracker Sensor
- The module is a convenient carrier for eight IR emitter and receiver pairs evenly paced.
- Distance between each IR Sensor: 15mm
- Uses 5 sensors for best resolution
- Great useful in building fast line following and grid navigating robots
2 channel 5V DC Relay Module
රු440.00- Low-level trigger (15-20mA per channel)
- Controls up to AC 250V 10A / DC 30V 10A
- Directly compatible with Arduino, Raspberry Pi
- Optocoupler isolation for safety
- Independent control of 2 devices
- LED status indicators
- Easy integration with standard interface
MQ-8 Hydrogen Gas Sensor Module H2 Alarm Detection
රු450.00- Using high-quality dual-panel design, with power indicator and TTL signal output instructions.
- The switching signal having a DO (TTL) output and analog output AO.
- TTL output valid signal is low.
- The higher the voltage, the concentration of the analog output voltage is higher.
- A hydrogen gas detection with good sensitivity.
- Has a long life and reliable stability
BFD-1000 Five Channel Infrared Tracking Module Tracing Sensor
රු1,450.00- 5 channel high sensitivity sensor
- High accuracy for tracking black line.
- Distance sensor at the front, distance can be adjusted
- Special touch sensor design, making the robot design simple
- Digital output signal
- Indicator LEDs
DHT11 Temperature And Humidity Sensor Module with LED
රු380.00- Input Supply voltage (VDC): 3.3 ~ 5
- Supply Current (mA): measurement 0.3mA standby 60μA.
- Temperature measurement range: 0~50 degrees
- Temperature measurement error: ±2 degrees
- Humidity measurement range: 20%~95%RH
- Humidity measurement error: ±5%RH
MQ-4 High Sensitivity Gas Methane (CNG) Detector Sensor Module
රු360.00- Detecting range: 300~10000ppm
- Signal output indicator.
- Dual Signal output (analog output and TTL output).
- The TTL output signal is low level, allows us to connect with SCM directly.
- Analog output 0~5V voltage.
- Quick response and recovery.
MQ-6 Liquefied Petroleum Isobutane Propane Gas Sensor module
රු380.00- Model: MQ-6
- Operating Voltage: 5V DC
- Detecting Range:200-10000 ppm
- Relative Humidity:<95% RH
MQ-2 Smoke LPG Butane Hydrogen Gas Sensor Detector Module
රු490.00- Operating Voltage:+5V
- Preheat Duration:20 s
- Analog Output Voltage:0 to 5 V
- Dimension:36x20x21 mm
MPU9250 9-Axis Attitude Gyro Accelerator Magnetometer Sensor Module
රු1,465.00- Accelerometer, Gyroscope, and Magnetometer
- Power Supply: DC3.3V-5V
- Chip: MPU9250
- Size: 22 mm x 17 mm.
- Gyro range : ± 250 500 1000 2000 ° / s
- Acceleration range: ± 2 ± 4 ± 8 ± 16g
- Magnetic field range: ± 4800uT
- 9 DOF modules
Arduino Uno R3 SMD CH340G Compatible
රු1,150.00- Microcontroller: ATmega328P
- Serial IC : CH340G
- Operating Voltage: 5V
- Input Voltage: 7-12V (recommended 5V)
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- PWM Digital I/O Pins: 6
- Analog Input Pins: 6
