Shop
- No categories
SW-420 Motion Tilt Vibration Sensor Module
රු125.00- Product parameters: Working voltage: 3.3V ~ 5V, Output format: digital switching output (0 and 1), Small board PCB size: 32x14mm/1.26×0.55in.
- Features: Using a wide voltage LM393 comparator, the signal is clean, the waveform is good, and the driving ability is strong. More than 15mA. With adjustable precision potentiometer to adjust the sensitivity.
- LED indicator: When the switch signal indicator is on, it outputs a low level, and when it is off, it outputs a high level. The level of the signal output is close to the power supply voltage.
- Application: Used to trigger the effect of various vibration, theft alarm, intelligent car, earthquake alarm, motorcycle alarm, etc
Takumi Solder Sucker Desoldering Pump
රු200.00- Size: 7.5 inches
- Material: Plastic and Aluminum
- Color: Yellow
- Best tool for all your DIY desoldering work.
- Anti-static with replaceable nylon tip
- Durable aluminum housing
- Best for removing solder through-hole solder joints
- Ideal for use in labs, service shops, home and industry
TCRT5000 Infrared Line Tracking Sensor
රු175.00- Working voltage of 3.3V to 5V
- Output form: digital switch output (0 and 1)
- Using infrared reflection sensors TCRT5000
- Test reflection distance: 1mm to 25mm
TCRT50003-pin Line Hunting Sensor Module
රු200.00- Supply Voltage: 3.3V~5V
- Detect distance: 1mm-8mm
- Digital Outputs LOW when objects detected
- On-board indicator LED to show the results
- On-board potentiometer to adjust the sensitivity
- On-board LM393 chip
TCRT5000L Infrared 5 Channel Tracking Sensor
රු890.00- Applicable to a variety of platforms including for Arduino /AVR/ARM/PIC
- High-Quality Tracker Sensor
- The module is a convenient carrier for eight IR emitter and receiver pairs evenly paced.
- Distance between each IR Sensor: 15mm
- Uses 5 sensors for best resolution
- Great useful in building fast line following and grid navigating robots
TP4056 5V 1A Micro USB 18650 Special Lithium Battery Charging Module (With Protection)
රු70.00- Input Voltage: 5V
- Maximum Charge Current: 1000mA.
- Board Size: 17.16 mm x 26.17 mm.
- Charging cut-off voltage: 4.2V ± 1%.
- Battery overcurrent protection current: 3A.
- Battery over-discharge protection voltage: 2.5V.
TTP223B Digital Sensor Module Capacitive Touch Switch
රු150.00- Power supply voltage(VCC): 2.0, 3, 5.5 V.
- Output high VOH: 0.8VCC V
- Output low VOL: 0.3VCC V
- Response time (touch mode) : 60 mS
- Response time (low power mode) : 220 mS
- Can replace the traditional touch of a button
- Four M2 screws positioning holes for easy installation
Ultrasonic Sensor Mounting Bracket For HC-SR04
රු120.00- Made of durable material
- Compatible with the HC-SR04 ultrasonic module
- A miniature version of the Optimus Mega Ultrasonic Bracket which has the same features.
USB-A to USB-B Cable – Printer Cable (150cm)
රු200.00- Type: USB 2.0 Type A Male to Type B Male Connection Cable.
- Cable Lenght: about 1.5M / 4.9FT Long. Color: Transparent Blue.
- With single magnetic ring, makes the signal transmission clear, stable and fast.
- USB Data Sync Cable for Arduino UNO R3 Board, ATMEGA328P and MEGA2560 Modules.
- Compatible for USB B ports of printer, scanner, fax, server, monitor, hard disk, keyboard, digital camera, digital piano and audio device interface.
