Shop
- No categories
Ultrasonic Sensor Mounting Bracket For HC-SR04
රු120.00- Made of durable material
- Compatible with the HC-SR04 ultrasonic module
- A miniature version of the Optimus Mega Ultrasonic Bracket which has the same features.
Arduino Pro Mini ATMega328 3.3V Board
රු950.00- Pro Mini Atmega328 3.3V 8Mhz
- It has been programmed for its bootloader, without the user to buy ISP burner for programming, user-friendly.
- This board connects directly to the FTDI Basic Breakout board and supports auto-reset.
- Low-voltage board needs no interfacing circuitry to popular 3.3V devices and modules (GPS, accelerometers, sensors, etc)
LM2596 DC-DC Buck Converter Step-Down Power Module
රු230.00- operating temperature: -40 to + 85 degrees
- Operating frequency: 150KHz
- Conversion efficiency: up to 96% (efficiency of input and output voltage, current, pressure related)
- Load regulation: S (I) ≤0.8%
- Voltage Regulation: S (u) ≤0.8%
SIM900 Quad-Band GSM GPRS Shield with Antenna
රු2,450.00- Compatible with Arduino and its clones
- Quad Band 850 / 900/ 1800 / 1900 MHz GSM network
- Can send and receive SMS, MMS, GPRS and audio using GSM network.
- Supports UART interface
- AT commands
- Embedded TCP/UDP stack facility for uploading data to a web server
- RTC support
- Speaker and Headphone jacks
- Equipped with 12 GPIOs, 2 PWMs, and an ADC
MQ-7 CO Carbon Monoxide Coal Gas Sensor Module
රු430.00- Operating voltage: DC 5 V.
- The analog output voltage, the higher the concentration the higher the voltage.
- The carbon monoxide detection with better sensitivity.
- With a long service life and reliable stability.
- Rapid response and recovery characteristics.
- Range: 10 to 1000 ppm
LIS3DSH 3-Axis Acceleration Sensor Module
රු725.00- Wide power supply voltage from 1.71 V to 3.6 V
- Independent IO power supply (1.8 V) and compatible power supply voltage
- Ultra-low energy consumption of about 2g/+ 6g/4g + 8g/+ 16 grams of dynamic optional full scale
- IIC/SPI digital output interface
- 16 little data output
- A programmable integrated state machine
GY-MAX30102 Heart Rate Pulse Oxygen Concentration Sensor
රු895.00- Optical Heart-Rate Monitor and Pulse Oximetry Solution
- Tiny 12.7mm x 12.7mm (0.5in x 0.5in) Board Size
- Low Power
- Device Drivers
- Free Algorithm
- Example C Source Code For Arduino And mbed Platforms
- Test Data
MPU-6050 3 Axis Gyroscope + Accelerometer Module
රු650.00- Model: GY-521
- Chip: MPU-6050
- Power supply: 3.3V
- Communication mode: standard IIC communication protocol
GY-61 ADXL335 3-axis Accelerometer Tilt Angle Sensor Module
රු1,250.00- Operating Voltage: 3V to 6V DC
- Operating Current: 350μA
- Sensing Range: ±3g
- 3-axis sensing
- High Sensitivity for small movements
MPU9250 9-Axis Attitude +Gyro + Accelerator + Magnetometer Sensor Module
රු1,550.00- Acceleration, Gyroscope, and Magnetometer
- 9 DOF module
- Build-in ultra-low noise linear LDO voltage regulator.
- Built-in onboard filters, which reduce noise from the motor and other high current electronics.
Infrared Obstacle Avoidance Sensor Module
රු180.00- Working Voltage : 3.3v to 5v
- Detectable Distance : 2 ~ 30cm,
- Detection angle : 35 °
- Comparator chip: LM393
GY-91 MPU9250+BMP280 10-DOF 9-Axis Gyro Compass Accelerometer Module
රු2,550.00- MPU9250 + BMP280 module (Three-axis gyroscope + triaxial accelerometer + triaxial magnetic field + pressure)
- Module Model: GY-91
- Use chip: MPU-9250 + BMP280
- Power supply: 3-5v (internal low dropout regulator)
- Communication: standard IIC / SPI communications protocol -Chip 16bit AD converter, 16-bit data output
