Shop
  • No categories

Vibration SW-18010P Sensor Module

රු215.00
  • Working voltage : 3.3V ~ 5V
  • Output type: Digital switching output (0 and 1)
  • Wide voltage : comparator LM393

Heart Beat Pulse Sensor

රු590.00
  • Biometric Pulse Rate or Heart Rate detecting sensor
  • Plug and Play type sensor
  • Operating Voltage: +5V or +3.3V
  • Current Consumption: 4mA
  • Inbuilt Amplification and Noise cancellation circuit.
  • Diameter: 0.625”
  • Thickness: 0.125” Thick

TCRT5000 Infrared Line Tracking Sensor

රු175.00
  • Working voltage of 3.3V to 5V
  • Output form: digital switch output (0 and 1)
  • Using infrared reflection sensors TCRT5000
  • Test reflection distance: 1mm to 25mm

IIC/I2C/TWI/SPI Serial Interface Board Module

රු150.00
  • I2C Address: 0X20 to 0X27 (the original address is 0X20; you can change it yourself.)
  • Supply voltage: 5V
  • the backlight and contrast are adjusted by potentiometer
  • It comes with two IIC interface, which can

AM2302 DHT22 Digital Temperature & Humidity Sensor

රු490.00
  • Measuring range: temperature -40-80 ℃; humidity 0; 99.9%RH
  • Measurement accuracy (25℃): temperature: + 0.5; humidity: + 2%RH (10; 90%RH)
  • Resolution: temperature: 0.1 ℃, humidity: 0.1%RH
  • Attenuation value: temperature: <1℃ / year; humidity: < 1%RH/ years
  • High precision
  • Capacitive type
  • Full range temperature compensated
  • Relative humidity and temperature measurement
  • Calibrated digital signal
  • Outstanding long-term stability

KY-021 Mini Magnetic Reed Switch Module

රු190.00

A reed switch closes to allow conduction when a magnet is brought close to the sensing area.

Laser Module 650nm for Arduino

රු200.00
  • Module: KY-008 Laser Module
  • Voltage: 3.0-5V
  • Operating Current: 40mA
  • Output: Red Laser
  • Wavelength: 650nm
  • Operating temperature: -36 ~ 65◦C

Hw-596 / Gy-68 Arduo Bmp180 Barometric Pressure Sensor Module

රු290.00
  1. 1.8V to 3.6V Supply Voltage
  2. Low power consumption – 0.5uA at 1Hz
  3. I2C interface
  4. Max I2C Speed: 3.5Mhz
  5. Very low noise – up to 0.02hPa (17cm)
  6. Fully calibrated

GY-271 HMC5883L 3-Axis Compass Magnetometer Module

රු450.00
  • 3-Axis magneto-resistive sensor
  • 1 to 2 degree compass heading accuracy
  • Wide magnetic field range (+/-8 gauss)
  • Fast 160 Hz maximum output rate
  • Precision in-axis sensitivity and linearity
  • Measures Earth’s magnetic field, from milli-gauss to 8 gauss

NodeMCU ESP8266 WiFi ESP-12E CH340 IoT Dev Board

රු800.00
  • 32 KB instruction RAM
  • 80 KB user data RAM
  • 16 KB ETS system data RAM
  • External QSPI flash: up to 16 MB is supported (512 KB to 4 MB typically included)
  • IEEE 802.11 b/g/n Wi-Fi
  • Integrated TR switch, balun, LNA, power amplifier and matching network
  • WEP or WPA/WPA2 authentication, or open networks
  • 16 GPIO pins

Micro:bit IO Extension Board

රු1,750.00
  • Powered on the indicator light will be red, with no power it won’t light up.
  • The jumper cap IObit is plugged in by default.
  • In the Make code, you can use the music column to program, and make a sound. Usually, there is no sound when you power it on.
  • All the pins in the have been taken out without any reservation.
  • 40P horizontal Socket compact size socket.

Rain Water Level Sensor Depth Detection

රු120.00
  • Operating voltage: DC3-5V
  • Operating current: less than 20mA
  • Sensor Type: Analog