Shop
- No categories
Mega 2560 PRO MINI 5V (Embed) CH340G ATmega2560-16AU
රු4,250.00This is a low cost and miniature version of the popular Arduino Mega 2560. It is assembled with a genuine Atmel ATmega2560 microcontroller and the low cost CH340G USB-UART interface.
This board is compatible with the Arduino Mega 2560. It has a compact form factor of 38 x 54mm and is an excellent solution for developing projects based on ATmega2560.
The Mega Pro Embed functionalities are identical to the Arduino Mega 2560. Even though it is an Embed board, it is solid stable as the Mega Board. It uses the original chip, and a 16 MHz high-quality quartz resonators is present on the board.
Micro:bit IO Extension Board
රු1,750.00- Powered on the indicator light will be red, with no power it won’t light up.
- The jumper cap IObit is plugged in by default.
- In the Make code, you can use the music column to program, and make a sound. Usually, there is no sound when you power it on.
- All the pins in the have been taken out without any reservation.
- 40P horizontal Socket compact size socket.
Micro:bit V1.5 BBC Offical Microbit Programmable Learning Development Board
රු5,950.00- Nordic nRF51822 Multi-protocol Bluetooth? 4.0 low energy/2.4GHz RF SoC
- 32-bit ARM Cortex M0 microprocessor (16MHz) 16kB RAM, 256kB Flash
- LED matrix ‘screen’ made up of 25 programmable LEDs Two programmable buttons
- USB Plug (Micro-USB plug) Reset button Status LED
Mini-Drill With Accessories And Power Supply Mini Electric Pcb Drill
Original price was: රු5,290.00.රු4,290.00Current price is: රු4,290.00.- A miniature electric drill, designed for making small holes and fine grinding. The small and handy drill will allow you to make assembly holes or grind out a protruding piece of plastic easily and quickly.
- Technical specificationsTurns: 12000 rpm
- Built-in switch
- Housing in shape for a comfortable grip
- Spindle lock button
- Drills included: 0.5 mm; 1.0 mm; 1.5 mm; 2.5 mm; 3.0 mm
- Drill diameter: 0.8 – 3 mm
MPU-6050 3 Axis Gyroscope + Accelerometer Module
රු650.00- Model: GY-521
- Chip: MPU-6050
- Power supply: 3.3V
- Communication mode: standard IIC communication protocol
MPU9250 9-Axis Attitude +Gyro + Accelerator + Magnetometer Sensor Module
රු1,550.00- Acceleration, Gyroscope, and Magnetometer
- 9 DOF module
- Build-in ultra-low noise linear LDO voltage regulator.
- Built-in onboard filters, which reduce noise from the motor and other high current electronics.
MPU9250 9-Axis Attitude Gyro Accelerator Magnetometer Sensor Module
රු1,465.00- Accelerometer, Gyroscope, and Magnetometer
- Power Supply: DC3.3V-5V
- Chip: MPU9250
- Size: 22 mm x 17 mm.
- Gyro range : ± 250 500 1000 2000 ° / s
- Acceleration range: ± 2 ± 4 ± 8 ± 16g
- Magnetic field range: ± 4800uT
- 9 DOF modules
MQ 135 Air Quality/Gas Detector Sensor Module
රු490.00- Sensitivity to Ammonia, Sulphide and Benzene steam
- Sensitive for benzene, alcohol, smoke
- Fast response and recovery
- Adjustable sensitivity
- Signal output indicator
- Output voltage boosts along with the concentration of the measured gases increases.
MQ-2 Smoke LPG Butane Hydrogen Gas Sensor Detector Module
රු490.00- Operating Voltage:+5V
- Preheat Duration:20 s
- Analog Output Voltage:0 to 5 V
- Dimension:36x20x21 mm
MQ-3 Alcohol Detector Gas Sensor Module
රු410.00- ower requirements: 5 VDC @ ~165 mA (heater on) / ~60 mA (heater off).
- Current Consumption: 150mA.
- DO output: 0.1 and 5V.
- AO output: 0.1- 0.3 V (relative to pollution), the maximum concentration of a voltage of about 4V
- Detecting Concentration: 0.05-10mg/L Alcohol.
MQ-4 High Sensitivity Gas Methane (CNG) Detector Sensor Module
රු360.00- Detecting range: 300~10000ppm
- Signal output indicator.
- Dual Signal output (analog output and TTL output).
- The TTL output signal is low level, allows us to connect with SCM directly.
- Analog output 0~5V voltage.
- Quick response and recovery.
MQ-5 Methane LPG Liquid Propane Gas Sensor Module
රු490.00- Model: MQ-5
- Operating Voltage: 5V DC
- Operating Temparature:-20~40 degree celcius
