Buy HM-10 BLE Bluetooth 4.0 CC2541 Wireless Module

HM-10 BLE Bluetooth 4.0 CC2541 Wireless Module

Bluetooth Protocol: Bluetooth Specification V4.0 BLE
USB Protocol: USB V2.0
Operating Frequency: 2.4GHz ISM band
Modulation Mode: GFSK (Gaussian Frequency Shift Keying)
Transmitting Power: ≤4dBm
Sensitivity: ≤-84dBm at 0.1% BER
It’s easy to use and completely encapsulated.
You can set it as slave or master.
You can use AT command set the baud rate.

Buy HM-10 BLE Bluetooth 4.0 CC2541 Wireless Module – the best price at Thingerbits Sri Lanka. Order now and we will send you within 2-3 working days

HM-10 BLE Bluetooth 4.0 CC2541 Wireless Module is a BLE module for an embedded system to get BLE wireless communication with BLE capable devices (e.g. Android, iPhone, and iPad).

It is fully configurable by a rich and well documented AT command-set and allows transparent data communication via serial UART (default baud rate 9600bps). The Bluetooth 4.0 HM-10 is basically a breakout board for cc2541, it broke out the LED pins, RX/TX and also adding the voltage regulator that regular 5v to 3.3 v.

HM-10 and HM-11 series Bluetooth module use TI CC2540 chip, configure 256KB space and support the AT command. Users can change the role (master, slave mode) and the serial port baud rate, equipment name, matching password and other parameters on-demand. It is very flexible to use.

The most complete, most convenient, and most stable Bluetooth data transmission, remote control and data acquisition module. Master-slave in one, transparent transmission, replacing the serial port. Remote control, transparent transmission, MCU is unnecessary. Remote data acquisition, transparent transmission, MCU is unnecessary.

Features :

It’s easy to use and completely encapsulated.
You can set it as a slave or master.
You can use the AT command set the baud rate.
Coverage up to 60 meters.
Built-in PCB antenna.
UART design.
Support bridge direct-driven mode simultaneously (no need for extra CPU).
20ms connection interval (default), quick to connect; Support AT instruction, to modify the baud rate of the serial port, gain MAC address and modify module name.
Support AT instruction, to adjust the Bluetooth connection interval and control the forwarding rate (dynamic power consumption adjustment).
Support APP; IO expansion.
2 channel ADC input (14 bit).
4 channel PWM (120Hz) output.
The RSSI successive acquisition, auto read, and notification to APP (used in anti-lost alarm).
Power indicator/alert.
Support anti-hijack password setup, modification, and restoration.
Ultra-low power consumption standby mode.

Package Includes :

1 x HM-10 BLE Bluetooth 4.0 CC2541 Wireless Module

Keywords:

HM-10 BLE module, CC2541 Bluetooth module, wireless communication module, BLE module for Arduino, Bluetooth 4.0 module, HM-10 module price, HM-10 module datasheet, HM-10 module applications, CC2541 datasheet, CC2541 module features, BLE communication module, wireless communication technology, Arduino Bluetooth module, wireless sensor module

Related questions:

What is the range of HM-10 BLE Bluetooth 4.0 CC2541 Wireless Module?, How to connect HM-10 BLE module to Arduino?, What are the features of the CC2541 Bluetooth module?, Where can I buy HM-10 BLE Bluetooth 4.0 CC2541 Wireless Module?, Is the HM-10 BLE module compatible with Raspberry Pi?, Can the CC2541 module be used for IoT projects?

Reviews

There are no reviews yet.

Be the first to review “HM-10 BLE Bluetooth 4.0 CC2541 Wireless Module” Cancel reply

If you have simply changed your mind or no longer require the item(s), you must notify us within 30 days from receiving your order.

The item(s) must be in their original unused and unopened packaging and be in a resalable condition for a full refund.

You will need to pay for the cost of returning the item(s) and the item(s) remain your responsibility until we receive them.

Damaged caused during transit must be notified within two days of the delivery.

All items sold as tested are genuinely tested before dispatch.
Product(s) which show obvious signs of misuse, damage or weather damage will not be eligible for refund or replacement.
All items are security marked.
Please ensure all security markings and stickers are intact or any warranty offered will be void.
All items are subject to satisfactory inspection of the anti-tamper warranty sticker/seal.
Any evidence that these aforementioned stickers/seals have been removed or broken will render the item out of warranty and will not be covered under warranty rules.
If the item becomes faulty within that period a replacement will be issued free of charge upon receipt of the faulty item, back to us, if proved to be faulty upon inspection.
If the item is not faulty or can be repaired, not to the detriment of the item, then this shall be undertaken rather than direct replacement.

Warranty Exclusion: Please note that as batteries are "consumables" we only provide dead on arrival warranty.

The maximum capacity of all rechargeable batteries fades with time depending on application and usage patterns.

This is considered normal - therefore, a change in battery capacity is not covered under warranty.

Battery life is not warranted and will vary depending on usage.

Please note- Any software is not covered by the warranty policy. Please refer to the copyright owner for specific details.