Arduino
BBC microbit
Raspberry Pi
ESP family
AVR
FPM10A Fingerprint reader Optical Sensor
Rs 3,390.00
- Supply voltage: DC 3.6 ~ 6.0V / 3.3V
- Fingerprint image time: <1.0 seconds
- Window size: 14 ╳ 18 mm
- Matching mode: Match mode (1:1)
- Search mode (1: N)
- Storage capacity: 200
Out of stock
- Supply voltage: DC 3.6 ~ 6.0V / 3.3V
- Supplying Supply Current: Current: <120mA
- Peak current: <140mA
- Fingerprint image time: <1.0 seconds
- Window size: 14 ╳ 18 mm
- Matching mode: Match mode (1:1)
- Search mode (1: N)
- Signature File: 256 bytes
- Template files: 512 bytes
- Storage capacity: 200
- Safety level: five (from low to high: 1,2,3,4,5)
- False Accept Rate (FAR): <0.001% (security level 3)
- False Reject Rate (FRR): <1.0% (security level 3)
- Search time: <1.0 seconds (1:500, the mean)
- PC Interface: UART (TTL logic level) or USB2.0 / USB1.1
- Communication baud rate (UART): (9600 ╳ N) bps where N = 1 ~ 12 (default value N = 6, ie 57600bps)
- Working environment: Temperature: -20 ° – +50 ° Relative Humidity: 40% RH-85% RH (non-condensing)
- Storage environment: Temperature: -40 ° – +85 ° Relative humidity: <85% H (non-condensing) Dimensions (L ╳ W ╳ H):
- Split: Fingerprint sensor: 56 ╳ 20 ╳ 21.5mm -One: 56 ╳ 20 ╳ 21.5mm
Hardware connection
Module via a serial communication interface, directly with 3.3V or 5V power microcontroller communication: Module data transmission feet (2 Foot TD) connected to the data bit machine receiving end (RXD), data receiver module feet (3 feet RD) connected to the data sender bit machine (TXD). For the RS-232 level (for example: PC machine) for PC communication, increase the level conversion between the module and the host computer Circuitry (e.g.: MAX232 circuit)
Be the first to review “FPM10A Fingerprint reader Optical Sensor”
If you have simply changed your mind or no longer require the item(s), you must notify us within 30 days from receiving your order.
The item(s) must be in their original unused and unopened packaging and be in a resalable condition for a full refund.
You will need to pay for the cost of returning the item(s) and the item(s) remain your responsibility until we receive them.
Damaged caused during transit must be notified within two days of the delivery.
- All items sold as tested are genuinely tested before dispatch.
- Product(s) which show obvious signs of misuse, damage or weather damage will not be eligible for refund or replacement.
- All items are security marked.
- Please ensure all security markings and stickers are intact or any warranty offered will be void.
- All items are subject to satisfactory inspection of the anti-tamper warranty sticker/seal.
- Any evidence that these aforementioned stickers/seals have been removed or broken will render the item out of warranty and will not be covered under warranty rules.
- If the item becomes faulty within that period a replacement will be issued free of charge upon receipt of the faulty item, back to us, if proved to be faulty upon inspection.
- If the item is not faulty or can be repaired, not to the detriment of the item, then this shall be undertaken rather than direct replacement.
Warranty Exclusion: Please note that as batteries are "consumables" we only provide dead on arrival warranty.
The maximum capacity of all rechargeable batteries fades with time depending on application and usage patterns.
This is considered normal - therefore, a change in battery capacity is not covered under warranty.
Battery life is not warranted and will vary depending on usage.
Please note- Any software is not covered by the warranty policy. Please refer to the copyright owner for specific details.
Related products
Out of stock
Sensors & Accessories
Rs 4,950.00
Out of stock
Sensors & Accessories
Rs 125.00
Out of stock
Sensors & Accessories
Rs 620.00
Out of stock
Sensors & Accessories
Rs 5,150.00
Out of stock
Sensors & Accessories
Rs 35.00
Out of stock
Out of stock
Rs 500.00
Out of stock
Sensors & Accessories
Rs 340.00
Reviews
There are no reviews yet.