Arduino
BBC microbit
Raspberry Pi
ESP family
AVR
OV2640 Binocular Camera Module CMOS STM32 Driver 3.3v 1600*1200 for 3D Measurement with SCCB Interface
- Pixel: 1600 x 1200 (200W)
- Sensor size: 1/4 inch
- Operating voltage (V): 3.3
- Current consumption (mA): 40
Buy OV2640 Binocular Camera Module CMOS STM32 Driver 3.3v 1600*1200 for 3D Measurement with SCCB Interface – the best price at Thingerbits Sri Lanka. Order now and we will send you within 2-3 working days.
The OV2640 binocular camera module is made with two 1/4-inch OV2640 million HD CMOS sensors. It has high sensitivity, high flexibility, and support for JPEG output. It can work in the same way as binocular camera and can be applied to many occasions such as binocular ranging, 3D measurement and so on.
The camera can be driven by STM32, which is very convenient to use, and the camera configuration can be freely carried out, which greatly increases the flexibility of the application.
Features:
- High sensitivity, low voltage for embedded applications.
- Standard SCCB interface, compatible with I2C interface.
- RawRGB, RGB (GRB4: 2: 2, RGB565/555/444).
- YUV (4:2:2) and YCbCr (4:2:2) output formats.
- Built-in embedded microprocessor.
- Support for image scaling, panning, and window settings.
- Support image compression to output JPEG image data.
- Integrated active crystal 12M, no external clock required.
- Integrated LDO, only need to supply 3.3V to work properly.
- Support UXGA, SXGA, VGA, QVGA, QQVGA, CIF, QCIF and various sizes up to 40×30 size.
- Support automatic exposure control, automatic gain control, automatic white balance.
- Automatically eliminates light streaks and automatic black level calibration.
- Output bit width: 8 bits.
- IO port level: 2.8v LVTTL, compatible with 3.3V.
- Output format: RawRGB, RGB (RGB565/RGB555), GRB422, YUV (422/420), YCbCr (422), JPEG data.
- Output pixels: UXGA (1600 * 1200) and below to any size of 40 * 30.
- Image quality control includes settings such as color saturation, hue, gamma, and sharpness ANTI_BLOOM.
Package Includes:
1 x OV2640 Binocular Camera Module CMOS STM32 Driver 3.3v 1600*1200 for 3D Measurement with SCCB Interface.
Keywords:
OV2640 camera module, binocular camera module, CMOS camera module, OV2640 3.3v camera module, STM32 driver camera module, 1600×1200 camera module, OV2640 for 3D measurement, OV2640 with SCCB interface, binocular camera for 3D measurement, OV2640 CMOS camera, STM32 compatible camera module, OV2640 driver module
Related questions:
What is the resolution of the OV2640 binocular camera module? Is the OV2640 camera module compatible with STM32 microcontrollers? How does SCCB interface benefit the OV2640 camera for 3D measurement? Can the OV2640 CMOS camera be used for depth sensing applications? How to integrate the OV2640 binocular camera module into a 3D measurement system?
Be the first to review “OV2640 Binocular Camera Module CMOS STM32 Driver 3.3v 1600*1200 for 3D Measurement with SCCB Interface”
- All items sold as tested are genuinely tested before dispatch.
- Product(s) which show obvious signs of misuse, damage or weather damage will not be eligible for refund or replacement.
- All items are security marked.
- Please ensure all security markings and stickers are intact or any warranty offered will be void.
- All items are subject to satisfactory inspection of the anti-tamper warranty sticker/seal.
- Any evidence that these aforementioned stickers/seals have been removed or broken will render the item out of warranty and will not be covered under warranty rules.
- If the item becomes faulty within that period a replacement will be issued free of charge upon receipt of the faulty item, back to us, if proved to be faulty upon inspection.
- If the item is not faulty or can be repaired, not to the detriment of the item, then this shall be undertaken rather than direct replacement.
Related products
Uncategorized
Uncategorized
Uncategorized
Sensors & Accessories
Uncategorized
Uncategorized
Uncategorized
Reviews
There are no reviews yet.