Buy Buy PN532 NFC RFID Module V3 Reader Writer Breakout Board

PN532 NFC RFID Module V3 Reader Writer Breakout Board

Module Size: 42.7mm x 40.4mm x 4mm
Easy to change mode: with a small SMD toggle Switch, it becomes very easy to change among IIC, SPI and HSU modes
Longer distance: the reading distance becomes 5~7cm, compared with 4~6 cm of last version
Built in PCB Antenna, with 5cm~7cm communication distance
On-board level shifter, Standard 5V TTL for I2C and UART, 3.3V TTL SPI
Work as RFID reader/writer
Work as 1443-A card or a virtual card

Buy PN532 NFC RFID Module V3 Reader Writer Breakout Board – the best price at Thingerbits Sri Lanka. Order now and we will send you within 2-3 working days.

The PN532 is a highly integrated transmission module for contactless communication at 13.56 MHz including microcontroller functionality based on an 80C51 core with 40 Kbytes of ROM and 1 Kbytes of RAM. The PN532 combines a modulation and demodulation concept completely integrated for different kinds of contactless communication methods and protocols at 13.56 MHz with an easy-to-use firmware for the different supported modes and the required host controller interfaces.

It works as RFID reader/writer,1443-A card or a virtual card and also supports NFC with Android phone. It is also compatible with Arduino.

Features:

Support II2, SPI and HSU (High-Speed UART)
I2C / UART: 3.3V ~ 24V TTL
SPI: 3.3V TTL with 100-ohm resistors in series
Communication distance: 5cm~7cm
On-board level shifter, Standard 5V TTL for I2C and UART, 3.3V TTL SPI
Work in NFC Mode or RFID reader/writer Mode
RFID reader/writer supports:
Plug and play, compatible
Built-in PCB Antenna, with 4cm~6cm communication distance
On-board level shifter, Standard 5V TTL for I2C and UART, 3.3V TTL SPI
Work as an RFID reader/writer
Work as a 1443-A card or a virtual card
Exchange data with other NFC devices such as a smartphone

Package Includes:

1 x PN532 NFC RFID Wireless Module V3

Keywords:

PN532 NFC RFID module, NFC RFID reader writer, PN532 module V3, NFC RFID breakout board, PN532 reader writer board, NFC RFID module for Arduino, PN532 RFID writer, NFC RFID tag reader writer, PN532 card reader writer, PN532 NFC module V3

Reviews

There are no reviews yet.

Be the first to review “PN532 NFC RFID Module V3 Reader Writer Breakout Board” Cancel reply

If you have simply changed your mind or no longer require the item(s), you must notify us within 30 days from receiving your order.

The item(s) must be in their original unused and unopened packaging and be in a resalable condition for a full refund.

You will need to pay for the cost of returning the item(s) and the item(s) remain your responsibility until we receive them.

Damaged caused during transit must be notified within two days of the delivery.

All items sold as tested are genuinely tested before dispatch.
Product(s) which show obvious signs of misuse, damage or weather damage will not be eligible for refund or replacement.
All items are security marked.
Please ensure all security markings and stickers are intact or any warranty offered will be void.
All items are subject to satisfactory inspection of the anti-tamper warranty sticker/seal.
Any evidence that these aforementioned stickers/seals have been removed or broken will render the item out of warranty and will not be covered under warranty rules.
If the item becomes faulty within that period a replacement will be issued free of charge upon receipt of the faulty item, back to us, if proved to be faulty upon inspection.
If the item is not faulty or can be repaired, not to the detriment of the item, then this shall be undertaken rather than direct replacement.