SMD Pixel LED WS2812

Rs 3,575.00

Out of stock

About this item

INDIVIDUALLY ADDRESSABLE. You can control each LED individually! Yes, that’s right; this is the digitally-addressable type of LED strip. You can set the color of each LED’s red, green and blue component with 8-bit PWM precision (so 24-bit color per pixel). WS2812B Led strips are work great with FastLED library
FULL COLORFUL: 256 brightness display and full 24-bit color display. Each 5050 SMD w/ WS2811 build in can have its own color and brightness. You can control each LED Pixel individually and set it to any color or animation you want
CUTTABLE&CONNECTABLE: This WS2812B Pixel can be cut off without damaging the rest pixels. Each LED strip comes with 3pin JST-SM connectors and can be connected end to end, Maxim base on you controller. So you can DIY for length you want.
HOW TO GET IT WORK: First, you will need an output is 5V power supply and controller (Both don’t include). Second, Connect Power and Ground from Power Supply. AND Connect Ground and Control (data) wire to whatever you are driving the string ESP8266 or any controller.
SAFETY & EASY INSTALLATION. Work under DC6V, low voltage for human safety, low power consumption, energy-saving, super-bright but running with low temperature. It comes with self-adhesive 3M tape on its back, so you can fix it on any dry and flat surface without any screws and clips.

There are no reviews yet.

If you have simply changed your mind or no longer require the item(s), you must notify us within 30 days from receiving your order.

The item(s) must be in their original unused and unopened packaging and be in a resalable condition for a full refund.

You will need to pay for the cost of returning the item(s) and the item(s) remain your responsibility until we receive them.

Damaged caused during transit must be notified within two days of the delivery.

All items sold as tested are genuinely tested before dispatch.
Product(s) which show obvious signs of misuse, damage or weather damage will not be eligible for refund or replacement.
All items are security marked.
Please ensure all security markings and stickers are intact or any warranty offered will be void.
All items are subject to satisfactory inspection of the anti-tamper warranty sticker/seal.
Any evidence that these aforementioned stickers/seals have been removed or broken will render the item out of warranty and will not be covered under warranty rules.
If the item becomes faulty within that period a replacement will be issued free of charge upon receipt of the faulty item, back to us, if proved to be faulty upon inspection.
If the item is not faulty or can be repaired, not to the detriment of the item, then this shall be undertaken rather than direct replacement.

Warranty Exclusion: Please note that as batteries are "consumables" we only provide dead on arrival warranty.

The maximum capacity of all rechargeable batteries fades with time depending on application and usage patterns.

This is considered normal - therefore, a change in battery capacity is not covered under warranty.

Battery life is not warranted and will vary depending on usage.

Please note- Any software is not covered by the warranty policy. Please refer to the copyright owner for specific details.