Arduino
BBC microbit
Raspberry Pi
ESP family
AVR
USB A to USB Mini B 30cm
Rs 130.00
USB Cable for Arduino NANO (USB Mini) can be used to power your favorite Arduino Nano board. They are detachable and can be used to upload the program to the Arduino Board.
Out of stock
Arduino Nano uses a USB A to USB Mini B (Male to Male) cable, Theoretically by using the Arduino nano cable (which is basically based on USB 2.0) one can get 480 Mbps data transfer rate in an end to end connection setup. The USB A end of the cable is connected with the powering device/power source (your computer or a battery adjusted with a potential divider circuit using a potentiometer) and the USB Mini B end is connected to Arduino Nano development board.
This USB cable is used to communicate, powering up, and uploading the Arduino code/sketch to the board. You just need to select the Arduino Nano and the concerned COM port in Arduino IDE. This type of cable if you remember was used in old day phones to charge them, when they were first introduced in the consumer market. Which was quickly replaced as standard my micro USB which is more compact than USB mini. And nowadays, even micro USB ports are out of use, since the introduction of USB C cables and ports. Arduino Nano still uses USB 2.0 and it is not expected to see USB 3.0 or more in the coming years, so you can safely buy them to use at our website.
Very few online retail sellers are selling this product as an individual product in India, so don’t waste time with them, give us a chance to serve.
Attention: This cable cannot be used with Arduino UNO or Arduino MEGA 2560 if you want to purchase for them you should look at the following link: USB cable for Arduino UNO/MEGA.
NOTE:
- Cable color and shape of USB Cable for Arduino Nano (USB A to USB Mini B) may vary slightly from an image as our stock rotates.
- USB Mini
- USB 2.0
Be the first to review “USB A to USB Mini B 30cm”
- All items sold as tested are genuinely tested before dispatch.
- Product(s) which show obvious signs of misuse, damage or weather damage will not be eligible for refund or replacement.
- All items are security marked.
- Please ensure all security markings and stickers are intact or any warranty offered will be void.
- All items are subject to satisfactory inspection of the anti-tamper warranty sticker/seal.
- Any evidence that these aforementioned stickers/seals have been removed or broken will render the item out of warranty and will not be covered under warranty rules.
- If the item becomes faulty within that period a replacement will be issued free of charge upon receipt of the faulty item, back to us, if proved to be faulty upon inspection.
- If the item is not faulty or can be repaired, not to the detriment of the item, then this shall be undertaken rather than direct replacement.
Related products
Parts & Components
Heat Sinks
Enclosure
Parts & Components
Joysticks
Modules & Shields
Expansion Board
Reviews
There are no reviews yet.