5V 1 Channel Relay Module

Trigger Voltage: 5 VDC
Trigger Current : 20 mA
Maximum Switching Voltage: 250VAC@10A; 30VDC @10A
Single Pole Double Throw (SPDT) Configuration
Power supply indicator lamp

This 1-channel 5V control Single-Pole Double-Throw (SPDT) High-level trigger AC power relay board can be controlled directly via a microcontroller and switch up to 10A at 250 VAC. The inputs of 1 Channel 5V Relay Module are isolated to protect any delicate control circuitry.

The default state of the relay when the power is off for COM (Power) to be connected to NC (Normally Closed). This is the equivalent of setting the relay board IN pin to HIGH (has +5V sent to it).

A wide range of microcontrollers such as Arduino, AVR, PIC, ARM, etc can be used to control this 5V relay module

NOTE : There Is Printing Mistake On Module 250VAC To 30VAC And 125VAC to 28VAC But Working Will Be Same.

Pin Configuration:

Connection Diagram:

Features :

1 channel relay module.
One normally closed contact and one normally open contact.
High impedance controller pin.
Default High-level trigger.
Pull-down circuit for the avoidance of malfunction.
Power supply indicator lamp.
Can be controlled various appliances & other Equipment With Large current.
Standard TTL Level logic controlled.
The module is compliant with international safety standards.
With 4 fixed screw holes, hole diameter 3.1mm, convenient installation, and fixation.

Package Include :

1 x 5V 1 Channel Relay Module

Reviews

There are no reviews yet.

Be the first to review “5V 1 Channel Relay Module” Cancel reply

If you have simply changed your mind or no longer require the item(s), you must notify us within 30 days from receiving your order.

The item(s) must be in their original unused and unopened packaging and be in a resalable condition for a full refund.

You will need to pay for the cost of returning the item(s) and the item(s) remain your responsibility until we receive them.

Damaged caused during transit must be notified within two days of the delivery.

All items sold as tested are genuinely tested before dispatch.
Product(s) which show obvious signs of misuse, damage or weather damage will not be eligible for refund or replacement.
All items are security marked.
Please ensure all security markings and stickers are intact or any warranty offered will be void.
All items are subject to satisfactory inspection of the anti-tamper warranty sticker/seal.
Any evidence that these aforementioned stickers/seals have been removed or broken will render the item out of warranty and will not be covered under warranty rules.
If the item becomes faulty within that period a replacement will be issued free of charge upon receipt of the faulty item, back to us, if proved to be faulty upon inspection.
If the item is not faulty or can be repaired, not to the detriment of the item, then this shall be undertaken rather than direct replacement.

Warranty Exclusion: Please note that as batteries are "consumables" we only provide dead on arrival warranty.

The maximum capacity of all rechargeable batteries fades with time depending on application and usage patterns.

This is considered normal - therefore, a change in battery capacity is not covered under warranty.

Battery life is not warranted and will vary depending on usage.

Please note- Any software is not covered by the warranty policy. Please refer to the copyright owner for specific details.