Arduino
BBC microbit
Raspberry Pi
ESP family
AVRArduino for Beginners Course – Full Hardware Kit
Rs 9,300.00
An embedded system is a combination of hardware and software provided that both should be synchronized with each other. Some examples are as follows: industrial machines, automobiles, medical equipment, cameras, household appliances, airplanes, vending machines etc. This kit for Arduino for beginner coursee
Out of stock
1. Objective:
An embedded system is a combination of hardware and software provided that both should be synchronized with each other. Some examples are as follows: industrial machines, automobiles, medical equipment, cameras, household appliances, airplanes, vending machines etc. The Arduino is an open-source computer hardware/software platform for building digital devices and interactive objects that can sense and control the physical world around them. In this course you will learn how the Arduino platform works in terms of the physical board and libraries and the IDE (Integrated Development Environment). The course will also cover programming the Arduino using C code and accessing the pins on the board via the software to control external devices. With this module student will get firm career growth in the Electronics domain.
2. Learning Outcome:
After the completion of the course, the students will be specialized in Embedded System Design using Arduino.
3. Syllabus Outline:
| Module | Lesson Plan | |
| 01 | Introduction to Arduino & Embedded System | 4.00 |
| 02 | Digital Write, LED Patterns, Knight Rider Patten, Relay Control | 4.00 |
| 03 | Analog Write & Pulse Width Modulation | 3.00 |
| 04 | Digital Read | 3.00 |
| 05 | Analog Read. RGB LED, Thermistor | 3.00 |
| 06 | Serial Communication & Bluetooth Controller | 3.00 |
| 07 | LCD Display and I2C Communication | 3.00 |
| 08 | Ultrasonic Sensor & Temperature sensor | 3.00 |
| 09 | Keypad & IR Remote | 3.00 |
| 10 | 433MHz Transmit and Receive Modules with Arduino | 3.00 |
| 11 | Seven Segment Display with Arduino | 3.00 |
| 12 | Motor Controlling ( Servo, DC, Stepper) | 3.00 |
| 13 | Obstacle avoiding Robot or Bluetooth Control Robot | 3.00 |
| 14 | Introduction to Internet of Things | 3.00 |
| 15 | Project Discussion | 3.00 |
| 16 | Final Project Presentation | 3.00 |
4. Hardware(s) required:
| Name | Qty |
| Arduino Uno R3 + USB Cable | 1 |
| 800 Full Breadboard | 1 |
| Red LED 5mm | 10 |
| Green LED 5mm | 5 |
| Blue LED 5mm | 5 |
| RGB LED 5mm | 1 |
| LED Bar Graph (RED) | 1 |
| 1 Digit 7 Segment Display | 1 |
| 4 Digit 7 Segment Display | 1 |
| LCD1602 Display Module | 1 |
| 1N4001 Diode | 2 |
| I2C Module | 1 |
| SG90 Servo | 1 |
| HC-04 Ultrasonic Sensor | 1 |
| Photoresistor | 1 |
| Potentiometer | 3 |
| 220Ω Resistor | 20 |
| 1kΩ Resistor | 10 |
| 10kΩ Resistor | 10 |
| 10k Thermistor | 1 |
| 12mmx12mmx5mm Push Button | 4 |
| 9v Battery and DC Jack | 1 |
| ULN2003 Stepper Motor + Driver | 1 |
| 4×4 Keypad | 1 |
| S8050 NPN Transistor | 2 |
| S8550 PNP Transistor | 2 |
| Active Buzzer | 1 |
| Passive Buzzer | 1 |
| 5v 1CH Relay | 1 |
| DHT11 temperature sensor | 1 |
| Infrared Remote / Receiver | 1 |
| Jumper Wire M/M | 40 |
| Jumper Wire F/M | 20 |
| Jumper Wire F/F | 20 |
| HC-05 Bluetooth Module | 1 |
| 433MHz RF Transmit and Receive Module | 1 |
| NodeMCU Board | 1 |
5. Final Evaluation Process for Certificate
| Grading Policy | Grade A+ | >80% | |
| Practical Assessments | 20 Points | Grade A | 70% |
| Project Submission | 30 Points | Grade B | 60% |
| Project Presentation | 20 Points | Grade C | 50% |
| Class Attendance | 30 Points | Grade S | 30% |
| Note: The grading will be relative among all the participants. | |||
| Attendance Policy | The certification will be awarded to participants with at least 80% attendance. |
This Course provides details of the Practical Assessments for this unit. It is very important that you are familiar with the assessments so please read this module carefully.
Mode of delivery
Face to Face Forty-eight (48) hours for one Level comprising lectures, tutorials, and practicals
Job Opportunities after completing this course:
After completing this course, participants can become:
- Embedded Programmer.
- Embedded software Engineer/hardware engineer.
- Embedded System Specialist.
- Specialist in Arduino based Embedded System Design.
Project Based on embedded system design using Arduino board
Students can make many projects on ARDUINO Based Embedded systems, few are listed below,
i.e.:
- ARDUINO based home automation.
- ARDUINO Based Solar Street Light system.
- ARDUINO Based Radar System
- ARDUINO Based Temperature Monitor
- ARDUINO Based Car Parking System, etc.
Be the first to review “Arduino for Beginners Course – Full Hardware Kit”
- All items sold as tested are genuinely tested before dispatch.
- Product(s) which show obvious signs of misuse, damage or weather damage will not be eligible for refund or replacement.
- All items are security marked.
- Please ensure all security markings and stickers are intact or any warranty offered will be void.
- All items are subject to satisfactory inspection of the anti-tamper warranty sticker/seal.
- Any evidence that these aforementioned stickers/seals have been removed or broken will render the item out of warranty and will not be covered under warranty rules.
- If the item becomes faulty within that period a replacement will be issued free of charge upon receipt of the faulty item, back to us, if proved to be faulty upon inspection.
- If the item is not faulty or can be repaired, not to the detriment of the item, then this shall be undertaken rather than direct replacement.
Related products
Learning Kits
Learning Kits
Learning Kits
Learning Kits
Learning Kits
Learning Kits
Learning Kits
Reviews
There are no reviews yet.