Features at a glance:
– It is a learning application development system based on a microcontroller, which can extend an external circuit module to increase more functions of this car
– It has functions of Bluetooth remote control
– You can choose L298N driver module as control motor, separate from the microcontroller,module can make up a remote control system of the car
– It can pair your phone’s Bluetooth with Bluetooth remote control module to control the car, also equipped with various sensors to complete different functions as much as possible
Course More Info: http://bit.ly/2M4o2M0
List component:
Main Pack Components List
Item | QTY |
Arduino Uno R3 board | 1 |
MB102 Full+ Breadboard 800 Pin | 1 |
Infrared Remote Control Module | 1 |
TCRT5000 Infrared Reflective Line Follower Module | 3 |
Red LED 5mm | 10 |
Green LED 5mm | 10 |
Blue LED 5mm | 10 |
Traffic light Module | 2 |
Jumper wires M-M | 40 |
Jumper wires M-F | 40 |
Jumper wires F-F | 20 |
220Ω Resistors | 10 |
1KΩ Resistors | 5 |
Push Button | 4 |
S8050 NPN transistor | 2 |
S8550 PNP transistor | 2 |
10uf capacitors | 2 |
100uf capacitors | 2 |
22pF Ceramic Capacitor | 2 |
NE555 IC | 1 |
5v Active Buzzer | 1 |
5v Passive Buzzer | 1 |
Photoresistor | 2 |
7 segment Display | 2 |
HC-05 Bluetooth Module | 1 |
80mm x 50mm Dot board PCB | 2 |
Reviews
There are no reviews yet.