ESP8266 (NodeMCU) WiFi Expansion Board with L293D Motor Driver

Motor Power Range: 4.5V ~ 36V
Control supply range: 4.5V ~ 9V
Logical operating current Iss: ≤60mA
Driving part of the work current Io: ≤1.2A
Maximum power dissipation: 4W (T = 90 ℃)
Operating temperature : -25 ℃ ~ + 125 ℃
Drive Type: Dual high-power H-bridge driver

L293D Motor Driver module is compatible with ESP12E Dev Kit and NodeMCU. This shield board is driven by the power full-bridge chip L293DD which can directly drive 2-channels DC motors or one-channel stepper motor.

In this motor shield board, the IO port of ESP-12E Dev Kit is used as the control port. The logic chip configured inside can finish IC driven. Thus, the shield board has four ports: D1, D2, D3, and D3, which are used as PWMA(motor A), PWMB (motor B), DA (direction of motor A), and DB (direction of motor B), respectively. In addition, this shield board has many pins, such as VIN, 3.3V, DIO, AIO, SDIO, UART, SPI, RST, and EN, thus can conveniently connect all kinds of sensors (e.g., temperature and humidity, buzzer, light, relay sensor, etc.)

Features:

ESP12 DEV KIT development board expansion module
Lead ESP12 DEV KIT all the features of pins: SPI, UART, GPIO, AI, and 3.3V power connector
Extend two-way motor-driven, two-way direct-drive motor
onboard power switch
Motor power, control power separation

Package Includes:

1 x L293D Motor Driver Board for ESP8266 WiFi NodeMcu Lua ESP12E

Reviews

There are no reviews yet.

Be the first to review “ESP8266 (NodeMCU) WiFi Expansion Board with L293D Motor Driver” Cancel reply

If you have simply changed your mind or no longer require the item(s), you must notify us within 30 days from receiving your order.

The item(s) must be in their original unused and unopened packaging and be in a resalable condition for a full refund.

You will need to pay for the cost of returning the item(s) and the item(s) remain your responsibility until we receive them.

Damaged caused during transit must be notified within two days of the delivery.

All items sold as tested are genuinely tested before dispatch.
Product(s) which show obvious signs of misuse, damage or weather damage will not be eligible for refund or replacement.
All items are security marked.
Please ensure all security markings and stickers are intact or any warranty offered will be void.
All items are subject to satisfactory inspection of the anti-tamper warranty sticker/seal.
Any evidence that these aforementioned stickers/seals have been removed or broken will render the item out of warranty and will not be covered under warranty rules.
If the item becomes faulty within that period a replacement will be issued free of charge upon receipt of the faulty item, back to us, if proved to be faulty upon inspection.
If the item is not faulty or can be repaired, not to the detriment of the item, then this shall be undertaken rather than direct replacement.

Warranty Exclusion: Please note that as batteries are "consumables" we only provide dead on arrival warranty.

The maximum capacity of all rechargeable batteries fades with time depending on application and usage patterns.

This is considered normal - therefore, a change in battery capacity is not covered under warranty.

Battery life is not warranted and will vary depending on usage.

Please note- Any software is not covered by the warranty policy. Please refer to the copyright owner for specific details.