Arduino
BBC microbit
Raspberry Pi
ESP family
AVR
Genuine Arduino Mega 2560 R3 Board
- Microcontroller : ATmega2560
- Operating Voltage : 5V
- Input Voltage (recommended) : 7-12V
- Input Voltage (limit) : 6-20V
- Digital I/O Pins : 54 (of which 15 provide PWM output)
- PWM Digital I/O Pins : 15
- Analog Input Pins : 16
The Arduino Mega 2560 is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega 2560 board is compatible with most shields designed for the Uno and the former boards Duemilanove or Diecimila.
Features
| Microcontroller | ATmega2560 |
| Operating Voltage | 5V |
| Input Voltage (recommended) | 7-12V |
| Input Voltage (limit) | 6-20V |
| Digital I/O Pins | 54 (of which 15 provide PWM output) |
| Analog Input Pins | 16 |
| DC Current per I/O Pin | 20 mA |
| DC Current for 3.3V Pin | 50 mA |
| Flash Memory | 256 KB of which 8 KB used by bootloader |
| SRAM | 8 KB |
| EEPROM | 4 KB |
| Clock Speed | 16 MHz |
| LED_BUILTIN | 13 |
| Length | 101.52 mm |
| Width | 53.3 mm |
| Weight | 37 g |
Be the first to review “Genuine Arduino Mega 2560 R3 Board”
- All items sold as tested are genuinely tested before dispatch.
- Product(s) which show obvious signs of misuse, damage or weather damage will not be eligible for refund or replacement.
- All items are security marked.
- Please ensure all security markings and stickers are intact or any warranty offered will be void.
- All items are subject to satisfactory inspection of the anti-tamper warranty sticker/seal.
- Any evidence that these aforementioned stickers/seals have been removed or broken will render the item out of warranty and will not be covered under warranty rules.
- If the item becomes faulty within that period a replacement will be issued free of charge upon receipt of the faulty item, back to us, if proved to be faulty upon inspection.
- If the item is not faulty or can be repaired, not to the detriment of the item, then this shall be undertaken rather than direct replacement.
Related products
Development Boards
Development Boards
Development Boards
Development Boards
Development Boards
Development Boards
ESP8266 (NodeMCU) WiFi Expansion Board with L293D Motor Driver
Development Boards
Development Boards
Reviews
There are no reviews yet.