Buy HCW-M421 (XY-J02) Programmable Delay Timer Module

HCW-M421 (XY-J02) Programmable Delay Timer Module

1. Product Name:Delay Relay Module
2. Product Number:XY-LJ02
3. Working Voltage:DC 6V-30V or 5V Micro USB
4. Control Current:10A(Max)
5. Quiescent Current:15mA
6. Working Current:50mA
7. Working temperature: -40~85℃
8. Suitable for the battery: Storage Battery, Lithium battery
9. Trigger signal source: High-level trigger (3.0V~24V), Low-level trigger (0.0V~0.2V), switching control (passive switch)
10. Reverse protection: Yes
11. Physical dimension:80*38*2.1mm

Buy HCW-M421 (XY-J02) Programmable Delay Timer Module – the best price at Thingerbits Sri Lanka. Order now and we will send you within 2-3 working days.

This is a XY-LJ02 6-30V Micro USB Digital LCD Display Time Module.

It is a multifunction delay relay module.LCD display, very clear, easy to use, powerful. It can be widely used at Smart home, Industrial control, Automatic irrigation, Indoor ventilation, Protection equipment.

Features:

LCD display;
Support high and low-level triggers;
Emergency stop function;
Sleep mode, Wake up with any button;
Automatically save parameters;
Support UART Set;
Independent of parameters;
Continuously adjustable from 0.01 seconds to 9999 minutes;
Optocoupler isolation.Enhanced anti-jamming capability

Working Mode:

P1:Relay will keep ON for time OP after getting the trigger signal and then relay OFF; The input signal is invalid if get trigger signal again during delay time OP.
P2:Relay will keep ON for time OP after getting trigger signal and then relay OFF; Module will restart-delay if get trigger signal again during delay time OP.
P3:Relay will keep ON for time OP after getting the trigger signal and then relay OFF; Module will reset and stop timing if get trigger signal again during delay time OP.
P4:Relay will keep OFF for time CL after getting trigger signal and then relay keep ON for time OP and then the relay will OFF.
P5:Relay will keep ON for time OP after getting the trigger signal and then relay keep OFF for time CL and then loops the above action. The module will reset and stop timing and relay OFF if get a trigger signal again during loops. The number of cycles (LOP) can be set.
P6:Relay will keep ON for time OP after power on without getting trigger signal and then relay keep OFF for time CL and then loops the above action. The number of cycles (LOP) can be set.
P7:Signal hold function. Reset delay time and relay keep ON if keep getting trigger signal. Relay OFF when the signal disappears. Reset delay time when getting trigger signal again during timing.

Timing Range:

Continuously adjustable from 0.01 seconds to 9999 minutes.
Enter the settings interface when short press button ‘STOP’ in the OP / CL parameter modification interface(Flashing) to select timing range.
Pay attention to the position where the decimal point moves when the button is pressed.
Display ‘XXXX’.No decimal point, the timing range is 1 second ~ 9999 seconds.
Display ‘XXX.X’.The decimal point is the penultimate, timing range is 0.1 second to 999.9 seconds.
Display ‘XX.XX’.The decimal point is the third last, timing range is 0.01 second to 99.99 seconds.
Display ‘X.X.X.X’.The decimal point is fully lit, timing range is 1 minute to 9999 minutes.
For example, if you want to set the OP to 3.2 seconds, move the decimal point to the penultimate position, LCD will display ‘003.2’.

Parameter Description:

OP: Turn On-time;
CL: Turn OFF time;
LOP: Number of cycles.The range is 1-9999tims.’—-’ means unlimited loop.

Set Parameter:

Long press: keep pressing the button for more than 3second.

Enter set parameter menu by long press button ‘SET’.
Work mode will flash at first set the working mode. Short press the UP/DOWN button to set the working mode.
Short press the SET button to select the working mode and enter the system parameter settings.
In the system parameter setting interface, short press the ‘SET’ button to switch the system parameters to be modified, short/long-press the UP/DOWN button to modify value;
Note: Short press ‘SET ’ is invalid at mode P1,P2,P3,P7.
Enter setting interface when short press button ‘STOP’ in the OP/CL parameter modification interface(Flashing) to select timing range (1s/0.1s/0.01s/1min).
Save the parameter settings and exit the settings interface when long-press the ‘SET’ button after all the parameters are set.

Keywords:

buy HCW-M421 (XY-J02) Programmable Delay Timer Module, programmable delay timer module, HCW-M421 timer module, XY-J02 delay timer module, buy timer module in Sri Lanka, where to buy HCW-M421 (XY-J02) Programmable Delay Timer Module, online purchase of delay timer module, Sri Lanka delay timer module supplier, electronic components store Sri Lanka, programmable timer module for sale, DIY electronics Sri Lanka

Reviews

There are no reviews yet.

Be the first to review “HCW-M421 (XY-J02) Programmable Delay Timer Module” Cancel reply

If you have simply changed your mind or no longer require the item(s), you must notify us within 30 days from receiving your order.

The item(s) must be in their original unused and unopened packaging and be in a resalable condition for a full refund.

You will need to pay for the cost of returning the item(s) and the item(s) remain your responsibility until we receive them.

Damaged caused during transit must be notified within two days of the delivery.

All items sold as tested are genuinely tested before dispatch.
Product(s) which show obvious signs of misuse, damage or weather damage will not be eligible for refund or replacement.
All items are security marked.
Please ensure all security markings and stickers are intact or any warranty offered will be void.
All items are subject to satisfactory inspection of the anti-tamper warranty sticker/seal.
Any evidence that these aforementioned stickers/seals have been removed or broken will render the item out of warranty and will not be covered under warranty rules.
If the item becomes faulty within that period a replacement will be issued free of charge upon receipt of the faulty item, back to us, if proved to be faulty upon inspection.
If the item is not faulty or can be repaired, not to the detriment of the item, then this shall be undertaken rather than direct replacement.

Warranty Exclusion: Please note that as batteries are "consumables" we only provide dead on arrival warranty.

The maximum capacity of all rechargeable batteries fades with time depending on application and usage patterns.

This is considered normal - therefore, a change in battery capacity is not covered under warranty.

Battery life is not warranted and will vary depending on usage.

Please note- Any software is not covered by the warranty policy. Please refer to the copyright owner for specific details.