MICROCHIP DM164151 Evaluation Kit

Product: MICROCHIP DM164151 Evaluation Kit, Curiosity Nano, AVR128D MCU, 8-Bit
One yellow user LED, one mechanical user switch
One 32.768KHz crystal
Board identification in Atmel Studio/Microchip MPLAB® X IDE
One green power and status LED

AVR128DA48 Curiosity Nano evaluation kit is a hardware platform to evaluate microcontrollers in the AVR-DA family. This board has the AVR128DA48 microcontroller (MCU) mounted. Supported by Atmel Studio and Microchip MPLAB® X Integrated Development Environments (IDEs), the board provides easy access to the features of the AVR128DA48 to explore how to integrate the device into a custom design. The Curiosity Nano series of evaluation boards include an on-board debugger. No external tools are necessary to program and debug the AVR128DA48. One yellow user LED, one mechanical user switch .One 32.768KHz crystal Board identification in Atmel Studio/Microchip MPLAB® X IDE .One green power and status LED. 500mA maximum output current (limited by ambient temperature and output voltage)

Note: For more technical details go through Datasheet in the attachment section

Features:

One yellow user LED, one mechanical user switch
One 32.768KHz crystal
Board identification in Atmel Studio/Microchip MPLAB® X IDE
One green power and status LED
500mA maximum output current (limited by ambient temperature and output voltage)
Virtual serial port (CDC), two debug GPIO channels (DGI GPIO)
USB powered
MIC5353 LDO regulator controlled by the on-board debugger
1.8V to 5.1V output voltage (limited by USB input voltage)

Package Includes:

1 x MICROCHIP DM164151 Evaluation Kit, Curiosity Nano, AVR128D MCU, 8-Bit

Reviews

There are no reviews yet.

Be the first to review “MICROCHIP DM164151 Evaluation Kit” Cancel reply

If you have simply changed your mind or no longer require the item(s), you must notify us within 30 days from receiving your order.

The item(s) must be in their original unused and unopened packaging and be in a resalable condition for a full refund.

You will need to pay for the cost of returning the item(s) and the item(s) remain your responsibility until we receive them.

Damaged caused during transit must be notified within two days of the delivery.

All items sold as tested are genuinely tested before dispatch.
Product(s) which show obvious signs of misuse, damage or weather damage will not be eligible for refund or replacement.
All items are security marked.
Please ensure all security markings and stickers are intact or any warranty offered will be void.
All items are subject to satisfactory inspection of the anti-tamper warranty sticker/seal.
Any evidence that these aforementioned stickers/seals have been removed or broken will render the item out of warranty and will not be covered under warranty rules.
If the item becomes faulty within that period a replacement will be issued free of charge upon receipt of the faulty item, back to us, if proved to be faulty upon inspection.
If the item is not faulty or can be repaired, not to the detriment of the item, then this shall be undertaken rather than direct replacement.

Warranty Exclusion: Please note that as batteries are "consumables" we only provide dead on arrival warranty.

The maximum capacity of all rechargeable batteries fades with time depending on application and usage patterns.

This is considered normal - therefore, a change in battery capacity is not covered under warranty.

Battery life is not warranted and will vary depending on usage.

Please note- Any software is not covered by the warranty policy. Please refer to the copyright owner for specific details.